Cap. 354V 《廢物處置(指定袋及指定標籤的指明規定)公告》Waste Disposal (Specified Requirements for Designated Bag and Designated Label) Notice

生效中

版本日期: 2023-10-20

Cap. 354U

Cap. 354W

Waste Disposal (Specified Requirements for Designated Bag and Designated Label) Notice

(Cap. 354, section 20T)

(Enacting provision omitted—E.R. 5 of 2022)

[1 September 2022]

1.

(Omitted as spent—E.R. 5 of 2022)

2. Requirements for designated bag

(1)

A designated bag must be a gusset seal bag that is—

(a)

of the shape, colour and design specified in Schedule 1 (t-shirt bag); or

(b)

of the shape, colour and design specified in Schedule 2 (flat-top bag).

(2)

The measurements of a designated bag that is a t-shirt bag must meet those of any of the items set out in column 1 of Table 1. However, a departure from any measurement in column 3 of Table 1 not exceeding 3% is not regarded as a non-compliance.

Table 1

Column 1	Column 2	Column 3
Item	Reference capacity	Width (W)	Gusset (G)	Height (H)
1.	3 L	24 cm	8 cm	37.5 cm
2.	5 L	25 cm	10 cm	43 cm
3.	10 L	31 cm	20 cm	53 cm
4.	15 L	33 cm	21 cm	59 cm
5.	20 L	36 cm	22 cm	64 cm

(3)

The measurements of a designated bag that is a flat-top bag must meet those of any of the items set out in column 1 of Table 2. However, a departure from any measurement in column 3 of Table 2 not exceeding 3% is not regarded as a non-compliance.

Table 2

Column 1	Column 2	Column 3
Item	Reference capacity	Width (W)	Gusset (G)	Height (H)
1.	20 L	36 cm	22 cm	60 cm
2.	35 L	38 cm	25 cm	72 cm
3.	50 L	40 cm	28 cm	81 cm
4.	75 L	50 cm	30 cm	90 cm
5.	100 L	56 cm	51 cm	99 cm
6.	240 L	81 cm	67 cm	116 cm
7.	660 L	145 cm	84 cm	160 cm

(4)

A designated bag must be made of plastic.

(5)

A designated bag must bear the anti-counterfeit features specified in Schedule 3.

3. Requirements for designated label

(1)

A designated label must be of a height and width of 13 cm each.

(2)

A designated label must be of the colour and design specified in Schedule 4.

(3)

A designated label must bear the anti-counterfeit features specified in Schedule 5.

Schedule 1 — Shape, Colour and Design of T-shirt Bag

[s. 2]

1.

The shape of a t-shirt bag must be as specified in the figure below—

2.

The colour and design of a t-shirt bag must be as specified in the figure below—

Notes— (1)The number “15” represents the reference capacity (in litres) of the designated bag. Depending on the reference capacity of the designated bag, the number may also be “3”, “5”, “10” or “20”.(2)The bar code may vary.(3)The batch number may vary.(4)The QR code may vary.(5)The wording of the safety warning may vary.

(L.N. 147 of 2023)

Schedule 2 — Shape, Colour and Design of Flat-top Bag

[s. 2]

1.

The shape of a flat-top bag must be as specified in the figure below—

2.

The colour and design of a flat-top bag must be as specified in the figure below—

Notes— (1)The number “20” represents the reference capacity (in litres) of the designated bag. Depending on the reference capacity of the designated bag, the number may also be “35”, “50”, “75”, “100”, “240” or “660”.(1A)This plastic recycling symbol (relevant symbol) represents the type of plastic material used for producing a designated bag. The relevant symbol must be used for a designated bag with a reference capacity of 20 litres, 35 litres, 50 litres or 75 litres. For a designated bag with a reference capacity above 75 litres, the plastic recycling symbol shown in the following figure must be used instead of the relevant symbol— (L.N. 147 of 2023)(2)The bar code may vary.(3)The batch number may vary.(4)The QR code may vary.(5)The wording of the safety warning may vary.

(L.N. 147 of 2023)

Schedule 3 — Anti-counterfeit Features of Designated Bag

[s. 2]

1.

A t-shirt bag must bear the anti-counterfeit features specified in the figure below—

Notes— (1)One of the bag reference capacity indication numbers is enlarged. The numbers vary depending on the capacity of the designated bag.(2)The bar code may vary.(3)The batch number may vary.(4)The QR code may vary.

2.

A flat-top bag must bear the anti-counterfeit features specified in the figure below—

(L.N. 147 of 2023)

Schedule 4 — Colour and Design of Designated Label

[s. 3]

1.

The colour and design of a designated label must be as specified in the figure below—

Notes— (1)The bar code may vary.(2)The QR code may vary.(3)The batch number may vary.

Schedule 5 — Anti-counterfeit Features of Designated Label

[s. 3]

1.

A designated label must bear the anti-counterfeit features specified in the figure below—

Notes— (1)The bar code may vary.(2)The QR code may vary.(3)The batch number may vary.(4)The anti-tampering design may vary.